Nidec Copal JT22 Single-turn Optical Contactless Potentiometer

JT22 Contactless configuration offers much longer life and lower noise compared with the conventional contact method.


Potentiometers are displacement sensors that produce electrical output (voltage) in proportion to the mechanical displacement. They are basically composed of a resistor and a wiper (brush), with the mechanical displacement of the resistor relative to the wiper being accurately converted into electrical voltage output. A voltage is applied to both ends of the resistor, and the wiper is moved. The displacement is measured by the voltage between one terminal of the resistor and the wiper. Looking at the component structurally, we can see the following: (Fig. 1) Further, the following formulas apply to the voltage output



Nidec Potentiometer

Model of potentiometer

Wirewound Type

Precision wire winding technology has been used to achieve low noise and long life. Wirewound types include the single turn J series for use in servo drives and the multiturn M series for use in setting.

Conductive Plastic Type

Special film resistors and original contact construction provide long life, with degradation that is theoretically infinitely small. Conductive plastic types include single turn types and linear types, both for use in servo drives.

Cerment Type

The use of cermet resistors allows low price. The degradation is theoretically infinitely small. Cermet tyeps are single turn for use in servo drives and for setting.

Optical Contactless Type

Contactless configuration offers much longer life and lower noise compared with the conventional contact method.

Optical Contactless Principle

Optical contactless potentiometers shall detect rotational angle at time of shaft rotation by positioning sensor which photo-electrically transfers the displacement of light transmitted through spiral slit that is placed between luminous element and positioning sensor


Nidec Copal

Nidec Copal

NIDEC COPAL ELECTRONICS was established in April 1967 in Japan as a specialty manufacturer of electronics components. The company's philosophy remains unchanged - to be a supplier of high quality products while offering competitive prices. NIDEC COPAL ELECTRONICS began by developing a wirewound trimmer. This product was enthusiastically received by many sectors in the industry. The initial success of the trimmers laid the groundwork for future development of a wide selection of manufactured products that combined electronics at the start of the electronics revolution.

Later, robust sales of cermet trimmers led to the company's remarkable expansion. Further development efforts led to the release of a succession of new product lines. These included a wide range of motors, encoders, switches and pressure sensors.


  • Contactless configuration offers much longer life
  • Low torque 0.147 mN·m {1.5 gf·cm} maximum
  • Superior temperature characteristic due to temperature compensation circut incorporated
  • Wide effective electrical angle (120° • 320°)
  • RoHS compliant


Electrical characteristics

Input voltage5 ± 0.25 VDC12 ± 0.6 VDC
Dissipation40 mA maximum
Effective electrical angle120°320°120°320°
Output voltage+0.5 ~ +4.5 V
Absolute linearity ※1± 3.0 %
Temperature sensitivity± 3.0 %FS (± 2.0 %FS/-30~70 °C)
Temperature medium drift± 40 mV
Insulation resistance100 MΩ (at 500 VDC) minimum
Dielectric strength500 VAC (1 min)

※ 1 At normal temp.

Mechanical characteristics

Starting torque0.147 mN·m {1.5 gf·cm} maximum(at normal temp.)
Maximum rotational speed1500 min-1
Mechanical angle360° continuous
Rotational life1 X 108 revolution(at 25 °C, 200 min-1)
Vibration147 m/s2  {15 G} 30 ~ 200 Hz, 30 h
Shock294.2 m/s2  {30 G} minimum
Strength of tighten screw0.49 N·m {5 kgf·cm} maximum

Environmental characteristics

Operating temp. range− 30 ~ 80 °C
Storage temp. range− 30 ~ 85 °C
HumidityRelative humidity 95 % maximum
Net weightApprox. 12g
Protection gradeIP40


Part Number Designation


Series name

Effective electrical angle



Input voltage

5:5 VDC

C:12 VDC


0:0.5~4.5 V

List of Part Numbers

Effective electrical angleInput voltagePart number
120°5 VDCJT22-120-500
12 VDCJT22-120-C00
320°5 VDCJT22-320-500
12 VDCJT22-320-C00

Additional Information



Output Circuity



Couldn’t find what you were looking for?

Contact us with your specification for assessment and availability of other products configurations.

Click Here