The Model 3810DS II is a mass flow meter with a built-in display using a time-tested flow sensor. The 3810DS II displays total flow in addition to instantaneous flow, which is an improvement on the previous model 3810DS.
The Model 3810DS II is a mass flow meter with a built-in display using a time-tested flow sensor. The 3810DS II displays total flow in addition to instantaneous flow, which is an improvement on the previous model 3810DS. Just like the 3810DS, the 3810DS II is also available with flow sensor and precision needle valve built into one piece.
The natural environment is preserved through the balance of solids, liquids and gases that exist on the earth. However, human civilization has caused pollution that has greatly damaged our environment. The task of the present generation is to restore our environment to its natural healthy state. And this is also the greatest challenge for 21st century science and technology.
KOFLOC's corporate motto is "A Scientific Approach for Fluids." In other words, we create products that scientifically measure and control the balance of liquids and gases. We trust that through our work we are making a contribution to the regeneration of the environment and to the establishment of a prosperous society.
| Sensor | Thermal sensor | |
| Flow range (N2 equivalent) | 10 SCCM–20 SLM | 21–100 SLM |
| Accuracy | Within ±2% F.S. at 25℃ | Within ±3% F.S. at 25℃ |
| Operating pressure | 0.0–0.5 MPa (G) | |
| Proof pressure | 1.0 MPa (G) | |
| Allowable ambient temperature | 0–50℃ | |
| Temperature coefficient | ±0.2% F.S./℃ (15–35℃) | |
| Materials of parts in contact with gases | Body: SUS303, PTFE | |
| Sealing: FKM | ||
| Option: Neoprene | ||
| Connection end | Standard: Rc 1/4 (Ask us for other sizes.) | |
| Power supply | 24 VDC ±5%, 100 mA (option: AC adapter) | |
| Flow output signal | 1–5 V, 4–20 mA (Select when ordering.) | |
| Event output | 2 × NPN open collector output Maximum rating: 30 VDC, 50 ｍA | |
*Cable connection
Connector: 3810DS II end: HR10A-7R-6P (Hirose Electric) Cable end: HR10A-7P-6S (Hirose Electric)
*A conversion cable for the previous model 3810DS is available.
!!NOTE!!
Specifications relating to the flow range (e.g., flow range, accuracy and repeat-ability) are expressed in N2 or air equivalent. The product will be built with the primary pressure of 300 kPa or less and the secondary side open to the atmos-phere. For details on the pressure requirements, ask us.
Contact us with your specification for assessment and availability of other products configurations.
Click Here
