Omron 2 Wire Proximity Sensor

Omron 2 Wire Proximity Sensor menggunakan osilasi frekuensi tinggi. Mereka menahan panas, bahan kimia, dan air lebih baik daripada Sensor Persegi Panjang. Mereka tersedia dalam model berpelindung dan tidak berpelindung.

Sensor Kedekatan tersedia dalam model yang menggunakan osilasi frekuensi tinggi untuk mendeteksi objek logam besi dan non-besi dan dalam model kapasitif untuk mendeteksi objek non-logam. Model tersedia dengan ketahanan lingkungan, tahan panas, tahan terhadap bahan kimia, dan tahan terhadap air.

Fitur Omron 2 Wire Proximity Sensor

Peningkatan ketahanan terhadap deterjen dan karat
Berlaku hingga 120C (dengan koneksi DC 3 kabel) (Tahan panas terverifikasi hingga 1.000 jam.)
Tahan deterjen dan disinfektan khas yang digunakan dalam industri makanan
Tahan air di bawah suhu tinggi, pembersihan tekanan tinggi berdasarkan DIN 40050-9. (Tekanan: 8.000 hingga 10.000 kPa, Suhu air: 80C, Selama 30 detik di semua sudut

Spesifikasi

Size Shielded		M12	M18	M30
		Shielded
Item Model		E2EH-X3D@	E2EH-X7D@	E2EH-X12D@
Sensing distance		3 mm	7 mm	12 mm
Set distance *1		0 to 2.4 mm	0 to 5.6 mm	0 to 9.6 mm
Differential travel		15% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data (Reference Value) on page 6.)
Standard sensing object		Iron, 12 ´ 12 ´ 1 mm	Iron 21 ´ 21 ´ 1 mm	Iron 36 ´ 36 ´ 1 mm
Response frequency *2		500 Hz	300 Hz	100 Hz
Power supply voltage (operating voltage range)		12 to 24 VDC, ripple (p-p): 10% max.
		(10 to 32 VDC, however, 24 VDC max. at temperatures over 100°C)
Leakage current		0.8 mA max.
Control out- put	Load current	3 to 100 mA (however, 3 to 50 mA at 100 to 110°C)
	Residual voltage *3	Polarity Models: 3 V max.
		No polarity Models: E2EH-X@D@-T: (5 V max. *3 (Load current: 100 mA, Cable length 2 m)
Indicators		D1 Models: Operation indicator (red), Setting indicator (yellow) D2 Models: Operation indicator (yellow)
Operation mode (with sensing ob- ject approaching)		D1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 7 for details. D2 Models: NC
Protection circuits		Surge suppressor, Load short-circuit protection
Ambient temperature range		Operating: 0 to 100°C (0 to 110°C 1,000 h) *4 Storage: -25 to 70° (with no icing or condensation)
Ambient humidity range		35% to 95%
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of 0 to 70°C.
		±15% max. of sensing distance at 23°C in the temperature range of 70 to 100°C.
		-15% to +20% of sensing distance at 23°C in the temperature range of 100 to 110°C.
Voltage influence		±10% max. of sensing distance at a rated voltage in the 15% rated voltage range.
Insulation resistance		50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 1,000 m/s2, 10 times each in X, Y, and Z directions
Degree of protection		IEC IP67, DIN 40050-9 IP69K *5
Connection method		Pre-wired Models (Standard cable length 2 m), Connector Models
Weight (packed state)	Pre-wired Models	Approx. 80 g	Approx. 145 g	Approx. 220 g
	Connector Models	Approx. 30 g	Approx. 55 g	Approx. 125 g
Materials	Case, clamping nut	Stainless steel (SUS316L)
	Sensing surface	PBT
	Cable	A heat-resistant PVC cable (Pre-wired model)
Accessories		Instruction manual

1. Gunakan indikator kuning pada Model D1 sebagai panduan.

2. Frekuensi respons adalah nilai rata-rata.

Kondisi pengukuran adalah sebagai berikut: objek penginderaan standar, jarak dua kali objek penginderaan standar, dan jarak yang ditetapkan setengah jarak penginderaan.

3. Tegangan sisa dari setiap Model E2EH-X@D@ DC 2-Wire adalah 5 V. Saat menghubungkan ke perangkat, pastikan perangkat dapat menahan tegangan sisa. (Lihat halaman 9.)

4. Pengoperasian dengan catu daya selama 1.000 jam telah diverifikasi pada suhu 110°C. Jangan tekuk kabel berulang kali pada suhu 100°C atau lebih tinggi.

5. Spesifikasi Tingkat Perlindungan IP69K

IP69K adalah standar perlindungan terhadap air bersuhu tinggi dan bertekanan tinggi yang ditentukan dalam standar Jerman DIN 40050, Bagian 9. Benda uji disemprot dengan air pada suhu 80°C pada tekanan air 80 hingga 100 BAR menggunakan bentuk nosel yang ditentukan dengan kecepatan 14 sampai 16 liter/menit.

Jarak antara benda uji dan nosel adalah 10 hingga 15 cm, dan air disemprotkan secara horizontal selama 30 detik masing-masing pada 0°, 30°, 60°, dan 90° sambil memutar benda uji pada bidang horizontal.

Baca Selengkapnya :

Omron Long Distance E2EM-X@X@ DC 2-Wire Models

Fitur

Deteksi jarak jauh hingga 30 mm memungkinkan pemasangan yang aman dengan pengurangan masalah karena benda kerja
Tidak ada polaritas untuk pemasangan kabel yang mudah dengan DC 2-kawat
Pelindung kabel disediakan sebagai standar

Spesifikasi

Size Shielded		M12	M18		M30
		Shielded	Shielded	Unshielded	Shielded	Unshielded
Item Model		E2EM-X4X@	E2EM-X8X@	E2EM-X16MX@	E2EM-X15X@	E2EM-X30MX@
Sensing distance		4 mm ±10%	8 mm ±10%	16 mm ±10%	15 mm ±10%	30 mm ±10%
Set distance *1		0 to 3.2 mm	0 to 6.4 mm	0 to 12.8 mm	0 to 12 mm	0 to 24 mm
Differential travel		15% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 4.)
Standard sensing object		Iron, 12 ´ 12 ´ 1 mm	Iron, 18 ´ 18 ´ 1 mm	Iron, 45 ´ 45 ´ 1 mm	Iron, 30 ´ 30 ´ 1 mm	Iron, 70 ´ 70 ´ 1 mm
Response frequency *2		1 kHz	0.5 kHz	0.4 kHz	0.25 kHz	0.1 kHz
Power supply voltage (operating voltage range)		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current		0.8 mA max.
Con- trol out- put	Load current	3 to 100 mA
	Residual volt- age *3	5 V max. (Load current: 100 mA, Cable length: 2 m)
Indicators		X1 Models: Operation indicator (red), Setting indicator (green) X2 Models: Operation indicator (red)
Operation mode (with sensing object approaching)		X1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 5 for details. X2 Models: NC
Protection circuits		Surge suppressor, Load short-circuit protection
Ambient temperature range		Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range
Insulation resistance		50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 60 g	Approx. 130 g	Approx. 150 g	Approx. 180 g	Approx. 210 g
	Case	Nickel-plated brass
	Sensing sur- face	PBT
	Clamping nuts	Nickel-plated brass
Materi- als	Toothed washer	Zinc-plated iron
Accessories		Instruction manual

Baca Selengkapnya : Additel Instruments Digital Pressure Test Gauges Additel 681 Series

Omron Standard Proximity Sensor E2E-X T1 AC/DC 2-Wire Model

Fitur dan Benefit

Sensor Standar untuk mendeteksi besi
Beragam variasi. Ideal untuk berbagai
Model dengan frekuensi yang berbeda juga tersedia untuk mencegah saling
Ketahanan lingkungan yang unggul dengan kabel standar yang terbuat dari PVC tahan minyak dan permukaan penginderaan yang terbuat dari bahan yang
tahan pemotongan
Berguna untuk membantu mencegah
Pelindung kabel disediakan sebagai fitur standar

Rating dan Spesifikasi

Size Shielded		M12	M18	M30
		Shielded
Item Model		E2E-X3T1	E2E-X7T1	E2E-X10T1
Sensing distance		3 mm ±10%	7 mm ±10%	10 mm ±10%
Set distance		0 to 2.4 mm	0 to 5.6 mm	0 to 8 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 17.)
Standard sensing object		Iron, 12 ´ 12 ´ 1 mm	Iron, 18 ´ 18 ´ 1 mm	Iron, 30 ´ 30 ´ 1 mm
Response frequency *1	DC	1 kHz	0.5 kHz	0.4 kHz
	AC	25 Hz
Power supply voltage (operating voltage range) *2		24 to 240 VDC (20 to 264 VDC)
		48 to 240 VAC (40 to 264 VAC)
Leakage current		DC: 1 mA max.
		AC: 2 mA max.
	Load current	5 to 100 mA
Control output	Residual voltage	DC: 6 V max. (Load current: 100 mA, Cable length: 2 m) AC: 10 V max. (Load current: 5 mA, Cable length: 2 m)
Indicators		Operation indicator (red), Setting indicator (green)
Operation mode (with sensing object approaching)		NO (Refer to the timing charts under I/O Circuit Diagrams on page 21 for details.)
Protection circuits		Load short-circuit protection (20 to 40 VDC only), Surge suppressor
Ambient temperature range		Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range
Insulation resistance		50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		4,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 80 g	Approx. 140 g	Approx. 190 g
	Case	Nickel-plated brass
	Sensing surface	PBT
	Clamping nuts	Nickel-plated brass
Materials	Toothed washer	Zinc-plated iron
Accessories		Instruction manual

Baca Selengkapnya : Additel Instruments Low Pressure Test Pump 901B Series

Omron Standard Proximity Sensor E2E-X AC 2-Wire Model

Fitur dan Benefit

Sensor Standar untuk mendeteksi besi
Beragam variasi. Ideal untuk berbagai
Model dengan frekuensi yang berbeda juga tersedia untuk mencegah saling
Ketahanan lingkungan yang unggul dengan kabel standar yang terbuat dari PVC tahan minyak dan permukaan penginderaan yang terbuat dari bahan yang
tahan pemotongan
Berguna untuk membantu mencegah
Pelindung kabel disediakan sebagai fitur standar

Rating dan Spesifikasi

Size Shielded		M8		M12		M18		M30
		Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded
Item Model		E2E-X1R5Y@	E2E-X2MY@	E2E-X2Y@	E2E-X5MY@	E2E-X5Y@	E2E-X10MY@	E2E-X10Y@	E2E-X18MY@
Sensing distance		1.5 mm ±10%	2 mm ±10%		5 mm ±10%		10 mm ±10%		18 mm ±10%
Set distance		0 to 1.2 mm	0 to 1.6 mm		0 to 4 mm		0 to 8 mm		0 to 14 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 18.)
Standard sensing object		Iron,	Iron, 12 ´ 12 ´ 1 mm		Iron,	Iron,	Iron, 30 ´ 30 ´ 1 mm		Iron,
		8 ´ 8 ´ 1 mm			15 ´ 15 ´ 1 mm	18 ´ 18 ´ 1 mm			54 ´ 54 ´ 1 mm
Response frequency		25 Hz
Power supply voltage (operating voltage range)*1		24 to 240 VAC (20 to 264 VAC), 50/60 Hz
Leakage current		1.7 mA max.
Load current *2		5 to 100 mA		5 to 200 mA		5 to 300 mA
Control output	Residual voltage	Refer to Engineering Data on page 19.
Indicators		Operation indicator (red)
Operation mode (with sensing object approaching)		Y1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 21 for details. Y2 Models: NC
Protection circuits		Surge suppressor
Ambient temperature range 12		Operating/Storage: -25 to 70°C (with no icing or condensation)		Operating/Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range		Operating/storage: 35% to 95% (with no condensation)
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C		±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C,
				±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range
Insulation resistance		50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		4,000 VAC (M8 Models: 2,000 VAC), 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
		Destruction: 500 m/s2
Shock resistance		10 times each in X, Y, and Z directions		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant Connector Models: IEC 60529 IP67
Connection method		Pre-wired Models (Standard cable length: 2 m) and Connector Models
Weight		Approx. 60 g		Approx. 70 g		Approx. 130 g		Approx. 175 g
		Approx. 15 g		Approx. 25 g		Approx. 40 g		Approx. 90 g
Materials	Case	Stainless steel (SUS303)		Nickel-plated brass
	Sensing surface	PBT
	Clamp- ing nuts	Nickel-plated brass
	Toothed washer	Zinc-plated iron
Accessories		Instruction manual

Baca Selengkapnya : Delta Mobrey 230 Series Pressure Switch

Omron Standard Proximity Sensor E2E-X DC 2-Wire Model

Fitur dan Benefit

Sensor Standar untuk mendeteksi besi
Beragam variasi. Ideal untuk berbagai
Model dengan frekuensi yang berbeda juga tersedia untuk mencegah saling
Ketahanan lingkungan yang unggul dengan kabel standar yang terbuat dari PVC tahan minyak dan permukaan penginderaan yang terbuat dari bahan yang
tahan pemotongan
Berguna untuk membantu mencegah
Pelindung kabel disediakan sebagai fitur standar

Rating dan Spesifikasi

Size Shielded		M8		M12		M18		M30
		Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded
Item Model		E2E-X2D@	E2E-X4MD@	E2E-X3D@	E2E-X8MD@	E2E-X7D@	E2E-X14MD@	E2E-X10D@	E2E-X20MD@
Sensing distance		2 mm ±10%	4 mm ±10%	3 mm ±10%	8 mm ±10%	7 mm ±10%	14 mm ±10%	10 mm ±10%	20 mm ±10%
Set distance *1		0 to 1.6 mm	0 to 3.2 mm	0 to 2.4 mm	0 to 6.4 mm	0 to 5.6 mm	0 to 11.2 mm	0 to 8 mm	0 to 16 mm
Differential travel		15% max. of sensing distance		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 17 and 18.
Standard sensing object		Iron,	Iron,	Iron,	Iron,	Iron,	Iron, 30 ´ 30 ´ 1 mm		Iron,
		8 ´ 8 ´ 1 mm	20 ´ 20 ´ 1 mm	12 ´ 12 ´ 1 mm	30 ´ 30 ´ 1 mm	18 ´ 18 ´ 1 mm			54 ´ 54 ´ 1 mm
Response frequency*2		1.5 kHz	1 kHz		0.8 kHz	0.5 kHz	0.4 kHz		0.1 kHz
Power supply voltage (operating voltage range)		Standard Models: 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) US Models and Connector Models Used as UL-certified Models:
		12 to 24 VDC, ripple (p-p): 10% max. (The operating voltage range is also the same.) *3
Leakage current		0.8 mA max.
Control output	Load current	3 to 100 mA, Diagnostic output: 50 mA for -D1(5)S Models
	Residual voltage *4	3 V max. (Load current: 100 mA, Cable length: 2 m, M1J-T Models only: 5 V max.)
Indicators		D1 Models: Operation indicator (red) and setting indicator (green) D2 Models: Operation indicator (red)
Operation mode (with sensing object approaching)		D1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 20 for details. D2 Models: NC
Diagnostic output delay		0.3 to 1 s
Protection circuits		Surge suppressor, Load short-circuit protection (for control and diagnostic output)
Ambient temperature range		Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range		Operating/storage: 35% to 95% (with no condensation)
Temperature influence		±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1000 VAC, 50/60 Hz for 1 minute between current carry parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
		Destruction: 500 m/s2
Shock resistance		10 times each in X, Y, and Z directions		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant Connector Models: IEC 60529 IP67
Connection method		Pre-wired Models (Standard cable length: 2 m), Connector Models, or Pre-wired Connector Models (Standard cable length: 0.3 m)
Weight (packed state)	Pre-wired Models	Approx. 60 g		Approx. 70 g		Approx. 130 g		Approx. 175 g
	Pre-wired Connector Models	—		Approx. 40 g		Approx. 70 g		Approx. 110 g
	Connector Models	Approx. 15 g		Approx. 25 g		Approx. 40 g		Approx. 90 g
Materi- als	Case	Stainless steel (SUS303)		Nickel-plated brass
	Sensing sur- face	PBT
	Clamping nuts	Nickel-plated brass
	Toothed washer	Zinc-plated iron
Accessories		Instruction manual