Hengstler Tico 772 Preset Counter

Hengstler Tico 772 Preset Counter

Table of Contents

Hengstler Tico 772 Preset Counter benar-benar multitalenta, menampilkan hingga tiga preset, dan dapat dihubungkan menggunakan konektor plug-and-play. Mereka memungkinkan frekuensi penghitungan yang sangat tinggi hingga 60 kilohertz dan secara universal cocok untuk digunakan sebagai penghitung pulsa, takometer, pengatur waktu, penghitung shift atau batch.

Baik Anda menggunakan penghitung elektronik, elektromekanis, mekanis, atau pneumatik, perangkat yang tersedia telah dirancang untuk memenuhi kebutuhan Anda. Jangkauan kami meluas dari penghitung mini hingga penghitung kontrol yang canggih dan dapat diprogram, penghitung multifungsi, tampilan posisi, tampilan, takometer, dan pengatur waktu.

Hengstler Tico 772 Preset Counter
Hengstler Tico 772 Preset Counter

Penjumlahan penghitung cenderung digunakan untuk mendaftarkan jumlah kejadian dan menampilkan hasilnya sebagai nilai numerik digital. Karakteristik utama rangkaian produk serbaguna ini, seperti yang Anda harapkan dari produk HENGSTLER mana pun, adalah teknologi canggih, desain menarik, kualitas, dan keandalan. Contoh aplikasi tipikal: Penghitungan produksi, pencatatan volume aliran.

Layar 6 digit multi-warna yang besar memiliki lampu latar dan mudah dibaca. Fleksibilitas tingkat pemrograman yang ditawarkan oleh pencacah multifungsi ini memungkinkannya digunakan sebagai pencacah preset dan, jika diperlukan, dengan banyak fungsi yang dapat diprogram.

Fitur Hengstler Tico 772

  • Operasi yang sangat sederhana
  • Empat warna lampu latar yang berbeda
  • Layar besar dan mudah dibaca
  • Menghitung frekuensi hingga 60 kHz
  • Prescaler 0,0001 – 99,9999

Spesifikasi

Product Family tico 772
Function Preset counter
Technology Electronic
Digits 6-digit
Display 6-digit
2-line
count reading/presets
leading zero suppression
decimal point (up to 4 places)
Preset 3 presets
Digit Height [mm] 1. Line 9.3 mm (0.4 in)
2. Line 7.2 mm (0.3 in)
Display Variant reflective LCD
transflective positive LCD, black digits, backlit
transmissive negative LCD, white digits, red or green backlit, background black
View Angle 12.00
Relay 1 or 1 relay
Time Base (Tachometer) programmable, sec min h or hh.mm.ss
Measuring Principle (timer) pulse width or period duration measurement (start-stop)
start Inp. A + Stop Inp. B,
Start/Stop button
Function Time Counter single pulse measurement or cumulative measurement
Application Input / Output (Timer) Output: preset 0-out
input: additional Run
Stop
Reset
Set
Keylock
Teach in
Accuracy of the Timer Time base. ± 30 ppm
Start / Stop time point: 16 µs / 16 ms (unattenuated/attenuated)
resolution: 100 µs = 100 ppm
Overall Tolerance (Timer) = display resolution + tolerance time base = 130 ppm
Resolution 1, 0.1, 0.01, 0.001, 0.0001
Size [mm] 48x48x118
Mounting Options Clamping frame
Mounting with clamping frame
Reset manual reset using a keypad
external reset static or dynamic
pulse duration min. 5 ms
automatic reset after preset 2 has been reached
no loss of pulse at the maximum counting frequency due to automatic resetting. programmable using application input and power-up reset
Weight [g] approx. 200 g (3.2 oz)4           c
Dimensions [mm] 48 mm x 48 mm x 118 mm (1.9 x 1.9 x 4.6 in), installation depth 110 mm (4.4 in), DIN 43 700
Panel Thickness [mm] max. 11 mm
Supply voltage SELV: 12-30 VDC; reverse polarity protected
SELV: 24 VAC, 50/60 Hz ± 10%
115 VAC; 230 VAC, 50/60 Hz ± 10%
100-240 VAC 50/60 Hz ± 10% with switch-mode power supply
Current consumption 12-30 VDC <200 mA,
12-30 VDC <250 mA with backlight
24 VAC <250 mA; including sensor supply
115/230 VAC <50 mA; including sensor supply
90 VAC max. 80 mA; including sensor supply with switch-mode
power supply
Power consumption <5 W
<8 W with switch-mode power supply
Duty cycle 100%
Overload protection External fuse DC: 0.16 AT (IEC 127); DC: 0.2 AT (UL 198)
24 VAC: 315 mAT; 230 VAC: 32 mAT; 115 VAC: 63 mAT
Overload protection
Relay outputs
External fuse 230 V, 2.5 mAT
DC: 0.16 AT (IEC 127);
DC: 0.2 AT (UL 198)
24 VAC: 315 mAT
230 VAC: 32 mAT; 115 VAC: 63 mAT
Sensor supply Transformer:
AC operation: 12-24 VDC (load dependent), max. 50 mA
Switch-mode power supply:
AC operation: 24 VDC/-5%, max. 115 mA
max. capacitive load = 470 µF
Data storage Non-volatile memory >10 years
Electrical connection Plug-in screw-type connections/terminals
Wire cross-section 1-1.5 mm² with wire-end sleeve
Amplitude threshold <2 V and >8 V or <1 V and >4 V at TTL level,
Amplitude max. 40 VDC
Active edge Programmable positive for PNP input, negative for NPN input
Input resistance Approx. 10 kOhm
Count frequency Max. 60 kHz; 30 Hz attenuated
max. 20 kHz; 30 Hz attenuated in TTL operation
Application input max. 6 kHz/30Hz attenuated
To prevent the maximum input frequency of 60 kHz from being
exceeded, the following maximum input frequencies apply:
Phase discriminator, single evaluation: A and B, each 30 kHz (20 kHz) TTL
Phase discriminator, double evaluation: A and B, each 30 kHz (20 kHz) TTL
Phase discriminator, quad evaluation: A and B, each 15 kHz (15 kHz) TTL
Single-channel metering & directional input: input A 60 kHz (20 kHz) TTL
Differential metering, totalizing: input A + B 60 kHz (20 kHz) TTL
If the application input is also used as a metering input:
Single-channel metering & directional input: input A + app. input
60 kHz (20 kHz) TTL
Differential metering, totalizing: input A + B + app. input
60 kHz (20 kHz) TTL
Pulse wave shape Any (at max. frequency, square 1:1)
Pulse duration min. 17 ms (30 Hz); 8 µs (60 kHz)
Prescaler 0.0001-99.9999
Reset Manual reset via keyboard, external static or dynamic reset,
min. pulse length 5 ms, automatic reset after reaching Preset 2.
No pulse losses at max. counter frequency due to automatic reset
function. Via programmable application input and programmable
power-on reset
Set function Setting to Preset 0 (independent of reset)
Display and preset range -999,999 to +999,999
Alarm signal The display flashes when preset 0, 1, or 2 is active
Signal times 0.01 s to 599.99 s or bistable programming; tolerance ± 10 ms; active on or off
Relay (Presets 1 and 2) Change-over contact max.: 250 VAC/30 VDC/5 A
Change-over contact min.: 5 VAC/5 VDC/10 mA;
delay <10 ms
Transistor output (Presets 1 + 2) PNP output:

  • 12-30 VDC, max. 50 mA for DC supply
  • 12-24 VDC, max. 30 mA for AC supply
  • 24 VDC, max. 50 mA for AC supply with switch-mode power supply
Application output PNP output:

  • 12-30 VDC, max. 20 mA for DC supply
  • 12-24 VDC, max. 20 mA for AC supply
  • 24 VDC, max. 20 mA for AC supply with switch-mode power supply
AC transformer only The combined current load of outputs (sensor 12-24 VDC, Out1, Out2, app. output) must not exceed 65 mA.

Download Data Sheet: Hengstler Tico 772 Preset Counter

Sumber : hengstler.de | inaparts.com

Baca Juga :

Share With Your Friends :

Share on linkedin
LinkedIn
Share on email
Email
Share on facebook
Facebook
Share on twitter
Twitter
Share on whatsapp
WhatsApp
Share on telegram
Telegram

you may also enjoy these articles: