Hengesbach DSA 1010 Digital Display

Hengesbach DSA 1010 Digital Display

Table of Contents

Hengesbach DSA 1010 Digital Display for wall structures is suitable for 0/4…20 mA or 0…+10 V DC input signals. The measuring input is galvanically separated from the supply voltage. The transmitter supply allows direct connection of 2- and 3-wire transmitters, e.g. for pressure or temperature. Display range and decimal points are freely programmable within the digits ± 9999. The fact that several parameters can be programmed allows universal application of the device.

The DTA 1010 digital tank content indicator can determine the content of tanks of various shapes, even when there is no linear relationship between filling height and content, i.e. the system compensates for non-standardized tank shapes. The measurement is based on the hydrostatic pressure or differential pressure (with 2 pressure sensors) or on distance sensors (e.g. ultrasound, radar, potentiometer).

The device provides the option of connecting an additional level sensor. When a specific level is reached, the display is corrected to the value that corresponds to the filling height in the tank in which the level sensor has been installed. Programming is performed at the membrane keyboard in front. The alarm outputs can be programmed as min. or max. functions. The switching states are indicated by LEDs. When the digital filter is activated, the mean of 16 measuring values is continuously calculated and displayed. An analog signal in the range 0…20 mA / 0…10 V DC or 4…20 mA / 2…10 V DC that is proportional to the tank content is provided. Switching from a current to a voltage signal is load-dependent (> 500 Ω to voltage).

Hengesbach DSA 1010 Digital Display Features:

Hengesbach is a company from Deutschland. For more than 50 years Hengesbach develops, manufactures, and distributes innovative measuring technology for applications in production processes where functionality, reliability, and accuracy of the instruments are of the highest priority even under extreme process conditions.

Hengesbach develops and produce measuring instruments with a clear focus on the worldwide active dairy, food and beverage industry. Especially within these applications, the highest hygienic requirements for the production of safe products are essential prerequisites. The product of Hengesbach Such as level measuring, flow measuring, pressure measuring, temperature measuring, analytical measurement, and evaluation. One of the products that come from Hengesbach is evaluation.

  • for standard signals 0/4…20 mA and 0…10V DC
  • Simple installation due to the wall structure with field housing
  • display range and decimal point freely programmable
  • field housing with hinged LID
  • optional with 2 alarm outputs, relay

Specification:

General information

Device type DSA 1010 digital display for wall structures
Applications Display of standard signals

Input

Current input 0/4…20 mA; Ri = 10 Ω
Voltage input 0…10 V; Ri = <100 k Ω
Potentiometer 0…1 kΩ/100 kΩ
Basic accuracy < 0,1% ±2 Digit
Temperature coefficient 0.004%/K
Transmitter supply U0 approx. 24V, Ri approx. 150 Ω, max. 50 mA (max. 25 mA at 4 relay outputs)

Display

Display scope ± 9999(0) digits with suppression of leading zeroes
Additional display LED 2 digits, red, 7 mm (display for parameter and switching state)

Output

Relay Change-over contact < 250 V AC < 250 VA < 2A, < 300 V DC < 50 VA < 2 A
Analog output 0/4…20 mA working resistance ≤ 500 Ω; 0/2…10V working resistance > 500 Ω, No galvanic separation, output switches automatically (load-dependent)
Accuracy 0.1%; TK 0.01 %/K

Conditions for use

Operation temperature -20…+55 °C

Auxiliary energy

Supply voltage 230 V AC ± 10%; 115 V AC ± 10%; 24 V AC ± 10 % or 24 V DC ± 15%
Power input max. 3.5 VA
Rated voltage 250 V~ according to VDE 0110 between input/output/auxiliary voltage, Overvoltage Category III
Test voltage 4 kV= between input/output/auxiliary voltage
CE conformity EN55022, EN60555, IEC61000-4-3/4/5/11/13

Design configuration

Housing Glassfibre-reinforced polyamide PA6-GF 15/15 for wall structures
Dimensions see dimensional drawing
Weight max. 450 g
Connection Spring-loaded clamps, 2 mm² single wire, 1.5 mm² single wire, AWG14
Type of protection IP 65, clamps IP 20, contact protected according to BGV A3

Download Data Sheet: Digital Display for Signal Input DSA 1010

Ref: hengesbach.com

Another Article:

Share With Your Friends :

Share on linkedin
LinkedIn
Share on email
Email
Share on facebook
Facebook
Share on twitter
Twitter
Share on whatsapp
WhatsApp
Share on telegram
Telegram

you may also enjoy these articles: