Omron E2F Resin Case Proximity Sensor

Omron E2F Resin Case Proximity Sensor tersedia dalam model yang menggunakan osilasi frekuensi tinggi untuk mendeteksi objek logam besi dan non-besi dan dalam model kapasitif untuk mendeteksi objek non-logam. Model tersedia dengan ketahanan lingkungan, tahan panas, tahan terhadap bahan kimia, dan tahan terhadap air.

Sensor Jarak ini menggunakan osilasi frekuensi tinggi. Mereka menahan panas, bahan kimia, dan air lebih baik daripada Sensor Persegi Panjang. Mereka tersedia dalam model berpelindung dan tidak berpelindung. Mereka menahan panas, bahan kimia, dan air lebih baik daripada Sensor Persegi Panjang. Mereka tersedia dalam model berpelindung dan tidak berpelindung.

Sensor Jarak E2F tersedia dalam model yang menggunakan osilasi frekuensi tinggi untuk mendeteksi objek logam besi dan non-besi dan dalam model kapasitif untuk mendeteksi objek non-logam. Model tersedia dengan ketahanan lingkungan, tahan panas, tahan terhadap bahan kimia, dan tahan terhadap air.

Fitur Omron E2F Resin Case Proximity Sensor

IP68
Pencegahan gangguan bersama dengan model dengan frekuensi yang berbeda juga

Spesifikasi

Model		E2F-X1R5E@ E2F-X1R5F@ E2F-X1R5Y@	E2F-X2E@ E2F-X2F@ E2F-X2Y@	E2F-X5E@ E2F-X5F@ E2F-X5Y@	E2F-X10E@ E2F-X10F@ E2F-X10Y@
Item
Sensing distance		1.5 mm ±10%	2 mm ±10%	5 mm ±10%	10 mm ±10%
Set distance		0 to 1.2 mm	0 to 1.6 mm	0 to 4 mm	0 to 8 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 3.)
Standard sensing object		Iron, 8 ´ 8 ´ 1 mm	Iron, 12 ´ 12 ´ 1 mm	Iron, 18 ´ 18 ´ 1 mm	Iron, 30 ´ 30 ´ 1 mm
Response frequency *1		E/F Models: 2 kHz, Y Models: 25 Hz	E/F Models: 1.5 kHz, Y Models: 25 Hz	E/F Models: 600 Hz, Y Models: 25 Hz	E/F Models: 400 Hz, Y Models: 25 Hz
Power supply voltage (operating voltage range)		E/F Models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
		Y Models: 24 to 240 VAC (20 to 264 VAC)
Current consumption		E/F Models: 17 mA max.
Leakage current		Y Models: 1.7 mA max. at 200 VAC (Refer to Engineering Data on page 3.)
Control output	Load current	E/F Models: 200 mA max. Y Models: 5 to 100 mA		E/F Models: 200 mA max. Y Models: 5 to 300 mA
	Residual voltage	E/F Models: 2 V max. (Load current: 200 mA, Cable length: 2 m) Y Models: Refer to Engineering Data on page 3.
Indicators		E1 Models: Detection indicator (red), E2/F1/F2 Models: Operation indicator (red) Y Models: Operation indicator (red)
Operation mode (with sensing object approaching)		E1/F1/Y1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 4 for details. E2/F2/Y2 Models: NC
Protection circuits		E/F Models: Reverse polarity protection, Load short-circuit protection, Surge suppressor; Y Models: None
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95%
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		E/F Models: ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range Y Models: ±1% max. of sensing distance at rated voltage in rated voltage ±10% range
Insulation resistance		50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		E/F Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Y Models: (M8 Models): 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case (Other M8 Models): 4,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP68, in-house standards: oil-resistant *2
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 40 g	Approx. 50 g	Approx. 130 g	Approx. 170 g
	Case
	Sensing surface	Polyarylate resin
Materials	Clamping nuts	Polyacetal
Accessories		Instruction manual

OMRON Metode Tes

Kondisi penggunaan: 10 m atau kurang di bawah air dalam kondisi alami
1. Tidak ada air yang masuk setelah 1 jam di bawah air pada tekanan 2 atmosfer.
2. Jarak penginderaan dan spesifikasi resistansi isolasi harus dipenuhi setelah 20 kali pengulangan 1 jam dalam air 0°C dan
1 jam dalam air 70°C.

Baca Juga: PDFlo™ PDFOP Flocorp Fiber Optic Sensor

Model

Model		Sensing distance	Output configuration	Model
				Operation mode
				NO	NC
Shielded	M8	1.5 mm	DC 3-wire, NPN	E2F-X1R5E1 2M	E2F-X1R5E2 2M
			DC 3-wire, PNP	E2F-X1R5F1 2M	E2F-X1R5F2 2M
			AC 2-wire	E2F-X1R5Y1 2M	E2F-X1R5Y2 2M
	M12	2 mm	DC 3-wire, NPN	E2F-X2E1 2M *	E2F-X2E2 2M *
			DC 3-wire, PNP	E2F-X2F1 2M	E2F-X2F2 2M
			AC 2-wire	E2F-X2Y1 2M *	E2F-X2Y2 2M *
	M18	5 mm	DC 3-wire, NPN	E2F-X5E1 2M *	E2F-X5E2 2M *
			DC 3-wire, PNP	E2F-X5F1 2M *	E2F-X5F2 2M
			AC 2-wire	E2F-X5Y1 2M *	E2F-X5Y2 2M *
	M30	10 mm	DC 3-wire, NPN	E2F-X10E1 2M *	E2F-X10E2 2M *
			DC 3-wire, PNP	E2F-X10F1 2M	E2F-X10F2 2M
			AC 2-wire	E2F-X10Y1 2M *	E2F-X10Y2 2M *