Brainchild RSC Rail Signal Conditioner menggabungkan dua Layar LCD terang yang mudah dibaca yang menunjukkan Nilai Proses (PV) dan parameter yang dipilih pengguna. Didukung oleh pasokan 11-26 atau 90-250 VDC /VAC.
Hal ini sepenuhnya dapat diprogram untuk Linear Voltage, Linear Current, PT100, dan tipe termokopel J, K, T, E, B, R, S, N, L, U, P, C, dan D masukan. Sinyal input didigitalkan dengan menggunakan konverter A-to-D 18-bit. Kecepatan pengambilan sampelnya yang cepat memungkinkan pengkondisi sinyal untuk mentransmisikan ulang sinyal lebih cepat. Itu dapat melakukan maksimal 3 transmisi ulang dengan satu input.
Baca Juga: Dinel MGU–800 Multifunction Graphical
Fitur Brainchild RSC Rail Signal Conditioner
Pengkondisi sinyal generasi baru memiliki banyak fitur unik. Fitur unik tercantum di bawah ini:
- Optional LCD Display
- High Accuracy 18 Bit A-D Conversion
- Up to 3 retransmission outputs with 15 Bit resolution
- Fastest Sampling Rate of 200 msec
- Universal Input
- RS-485 Communication
- Event Input
- Lockout Protection
- Bidirectional Menu Navigation
- SQRT Function for PV
Baca Juga: Brainchild BTC 4300 High-end Process and Temperature Controllers
Spesifikasi
Power
- Power Supply: 90 to 250VAC, 47 to63Hz, 20 to 28 VAC,47-63Hz / 11 to 40 VDC
- Power Consumption: 10VA, 5W Maximum
Sinyal Input
| Type | Thermocouple (J, K, T, E, B, R, S, N, L, U, P, C, D), RTD(PT100(DIN), PT100(JIS)), Current(mA), Voltage(V) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Resolution | 18 Bits | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sampling Rate | 5 Times / Second (200msec) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Maximum Rating | -2VDC minimum, 12VDC maximum | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Input Characteristics |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Temperature Effect | 1.5µV /°C for all inputs except mA input, 3.0µV /°C for mA | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sensor Lead Resistance Effect | Thermocouple: 0.2 µV /Ω; 3-wire RTD: 2.6°C /Ω of Difference of Resistance of two leads 2-wire RTD: 2.6°C /Ω of the Sum of Resistance of two leads | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Burn-out Current | 200nA | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Common Mode Rejection Ratio(CMRR) | 120 dB | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Normal Mode Rejection Ratio (NMRR) | 55dB | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sensor Break Detection | Sensor open for Thermocouple and RTD inputs, sensor short for RTD input, below 1mA for 4-20mA input, below 0.25V for 1 – 5V input, not available for other inputs | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sensor Break Responding Time | Within 4 seconds for Thermocouple and RTD inputs, 0.1 seconds for 4-20mA and 1 – 5V inputs |
Input
| Digital Input (DI1 or DI2) | |
|---|---|
| No. of Event Inputs | 1 |
| Logic Low | -10V minimum, 0.8V maximum. |
| Logic High | 2V minimum, 10V maximum |
| Functions | Refer to the user manual |
Output
| Analog Retransmission Output 1 /Output 2 /Output 3 | |
|---|---|
| Number of Outputs | 3 |
| Output Signal | 4-20mA, 0-20 mA,0 – 10VDC |
Specification
| Resolution | 15 Bits |
| Accuracy | ±0.05% of Span ± 0.0025% / °C |
| Load Resistance | 0 to 500Ω for current output, 10KΩ minimum for Voltage Output |
| Output Regulation | 0.01% for full load change |
| Output Setting Time | 0.1Second (stable to 99.9%) |
| Isolation Breakdown | 1000VAC min |
| Integral Linearity Error | ±0.005% of the span |
| Temperature Effect | ±0.0025% of span /°C |
| Saturation Low | 0mA or 0VDC |
| Saturation High | 22.2mA or 5.55V,11.1V min |
| Linear Output Ranges | 0 – 22.2mA (0 – 20mA/4 – 20mA), 0 – 5.55VDC (0 – 5VDC, 1 – 5VDC),0 – 11.1VDC (0 – 10VDC) |
Communication
| Data Communication | |
|---|---|
| Interface | RS-485 |
| Protocol | Modbus RTU (Slave Mode) |
| Address | 1 to 247 |
| Baud Rate | Latching, Hold, Normal, Latching/Hold |
| Dwell Timer | 0.1 to 4553.6 Minutes |
| Data Communication | |
|---|---|
| Interface | RS-485 |
| Protocol | Modbus RTU (Slave Mode) |
| Address | 1 to 247 |
| Baudrate | 2.8KBPS to 115.2 KBPS |
| Parity Bit | None, Even or Odd |
| Stop Bit | 1 or 2 Bits |
| Data Length | 7 or 8 Bits |
| Communication Buffer | 160 Bytes |
| User Interface | |
|---|---|
| Keypad | 4 Keys |
| Display Type | 4 Digit LCD Display |
| No of Display | 2 |
| Upper Display Size | 0.58” (15mm) |
| Lower Display Size | 0.3” (7.8mm) |
| User Interface | |
|---|---|
| Keypad | 4 Keys |
| Display Type | 4 Digit LCD Display |
| No. of Display | 2 |
| Upper Display Size | 0.31”(8mm) |
| Lower Display Size | 0.25”(6.5mm) |
| Programming Port | |
|---|---|
| Interface | Micro USB |
| PC Communication Function | Firmware upgrade |
| Digital Filter | |
|---|---|
| Function | First Order |
| Time Constant | 0,0.2, 0.5, 1, 2, 5, 10, 20, 30, 60 Seconds, Programmable |
| Environmental and Physical Specifications | |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -40°C to 60°C |
| Humidity | 0 to 90 % RH (Non-Condensing) |
| Altitude | 2000 Meters maximum |
| Pollution | Degree II |
| Insulation Resistance | 20MΩ minimum(@500V DC) |
| Dielectric Strength | 2000V AC,50/60 Hz for 1 Minute |
| Vibration Resistance | 10 to 55 Hz, 10m/s2 for 2 Hours |
| Shock Resistance | 200 m/s2(20g) |
| Dimensions (W*H*D) (mm) | 22.5*96*83 |
| Weight (grams) | 160 |
| Approval Standards | |
| Safety | UL61010-1, CSA 22.2 No.61010-1-12, EN61010-1 (IEC1010-1) |
| Protective Class | IP66 for Panel, IP20 for terminals and housing, all indoor use |
| EMC | EN61326 |
Baca Juga : KEPmeter ES-749 Utility Metering Flow Computer
Sumber: brainchildtw.com | inaparts.com
