Wenglor OTDK502A0002 Reflex Sensor Energetic

The transmitter and receiver in these sensors are located in a single housing. The sensor evaluates transmitted light reflected back from the object. The output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.

Description

The transmitter and receiver in these sensors are located in a single housing. The sensor evaluates transmitted light reflected back from the object. The output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.

Brand

Wenglor

Wenglor

Technology that moves in over three decades of wenglor sensoric. On this interactive journey through time, we researched deep into wenglor’s archives and have tracked the history of the company since the eighties – starting in an attic and growing into a global corporation.

The innovative company for smart sensor and image processing technologies. Many patented product and system solutions are used in countless automated industries worldwide. Constant growth, outstanding products and excellent corporate governance qualify wenglor as a top employer in the SME sector.

Features

  • Clever inclusive mounting technology
  • Adjustable detection range
  • Simple installation
  • Large detection range
  • Minimal installation space

Applications

Detection of Palms in Disinfectant Dispensers with Reflex Sensors

Disinfection stations for hands are provided in public areas such as shops, schools, train stations, airports, football stadiums, gyms and many more to meet hygiene standards. The automated disinfectant dispensers have one inlet for each hand. Compact reflex sensors are installed in narrow areas for contactless detection of the hands. The disinfection cycle starts as soon as the sensor has detected that both hands are present. This hygiene measure can combat the spread of germs quickly, effectively and fully automatically.

Energetic Reflex Sensors

Reflex sensors check objects for presence, check stack heights or perform counting tasks. They are used when objects need to be detected without a defined background. For this purpose, they use red light or infrared light according to the energy principle.

Specification

Optical Data

Range500 mm
Switching Hysteresis < 15 %
Light SourceInfrared Light
Service Life (T = +25 °C)100,000 h
Max. Ambient Light10,000 Lux
Opening Angle5 °

Electrical Data

Supply Voltage10 … 30 V DC
Current Consumption (Ub = 24 V)< 30 mA
Switching Frequency500 Hz
Response Time1 ms
Temperature Drift< 10 %
Temperature Range-25 … 60 °C
Switching Output Voltage Drop< 2.5 V
PNP Switching Output/Switching Current200 mA
Residual Current Switching Output< 50 µA
Short Circuit Protectionyes
Reverse Polarity Protectionyes
Overload Protectionyes
Protection ClassIII

Mechanical Data

Setting MethodPotentiometer
Housing MaterialPlastic
Degree of ProtectionIP67
ConnectionM12 × 1; 4-pin

Safety-relevant Data

MTTFd (EN ISO 13849-1)2,200.73 a

General Data

Scope of deliveryMounting Console

Output

PNP NO/NC antivalentyes

Adjustable parameters

CircuitNC
NC+NO
NO

Table 1

Detection Range100 mm300 mm500 mm
Light Spot Diameter11 mm26 mm41 mm

Couldn’t find what you were looking for?

Contact us with your specification for assessment and availability of other products configurations.

Click Here