Description
The ADMAG AXF series of electromagnetic flowmeters are electromagnetic flowmeters that use our original dual-frequency excitation method that is resistant to fluid noise such as slurries. An extended dual-frequency excitation method is available as an additional specification to support even more demanding applications.
Baca Juga: Definisi, Prinsip Kerja, Aplikasi Coriolis Mass Flow Meter
It has features such as an electrode adhesion diagnosis function that can monitor the electrode status in real time, an infrared switch that can be operated even with the cover closed, a wiring port that can change the direction at the site, and a rich lineup of materials and structures. It is a product that pursues user friendliness.
- The dual frequency excitation method is our original flow rate calculation method.
- ADMAG AXF is a registered trademark of Yokogawa Electric.
Features
Pursuit of user friendliness
Full electrode adhesion diagnosis
The state of insulation adhering to the electrodes of the electromagnetic flowmeter is monitored, and the maintenance time can be determined based on the diagnosis results.
Also, if you use an electromagnetic flow detector with a removable electrode structure, you can remove the electrode and clean it when adhesion occurs.
Change the direction of the wiring port at the site
Since the direction of the wiring port can be freely changed by rotating the conversion unit or terminal box, it is possible to flexibly handle wiring and plumbing work on site. (General type, sanitary type, explosion-proof type)
Abundant display functions
A full-dot matrix LCD is used for the integrated display, so various displays such as 1 to 3 line display and katakana display are possible. In addition, when an alarm occurs, the specific remedy is also displayed.
Easy Setup parameter
Frequently used parameters are extracted and put together in one block. General functionality can only be achieved with the parameters of this block. Also, since it uses an infrared switch, you can set parameters without opening the case cover.
Recruitment between new faces
The wafer type has a surface spacing that is up to 52 mm shorter than before. In addition, the flange type has adopted a surface spacing that complies with ISO standards. Considering compatibility with conventional models (ADMAG, YEWMAG series), replacement compatible products are also available.
Starts immediately after installation
Since the product is shipped with the main parameters set, it can be operated immediately after installation and wiring by simply turning on the power.
Expansion of lineup
Small diameter flange type
The flange type has expanded the range to a diameter of 2.5 mm.
Enhancement of sanitary shape
We have a lineup of clamps, unions and welded joints that comply with ISO standards.
Abundant options (additional specifications)
You can choose the best option for your application, such as mirror-finished lining, ground cooling (to prevent condensation), various gaskets, and paint color change.
Improvement of performance and specifications
Extended dual frequency excitation method
An extended dual-frequency excitation method that further enhances the features of Yokogawa Electric’s proprietary dual-frequency excitation can be selected as an option. Stable electromagnetic flow rate measurement is possible even for more severe applications than before, such as high-concentration slurry-mixed fluids and low-concentration fluids.
Achievement of minimum conductivity of 1 μS / cm
The minimum conductivity has been increased to 1 μS / cm. (Depending on the diameter and fluid conditions)
High-speed pulse output
The pulse output can be accelerated to 10000pps (pulses per second), and it can be used for applications such as short-time batches.
Full input / output function
Equipped with abundant input / output functions even in the integrated type.
Applications
The ADMAG AXF series of electromagnetic flowmeters are electromagnetic flowmeters that use our original dual-frequency excitation method that is resistant to fluid noise such as slurries.
