Oil Skimmer TB-75 Floated Oil Recovery Unit

Model TB-75 (for washers) has a special belt suitable for quick and efficient recovery of dirty washing fluid and floated oil.

Description

Floated oil in the machining tank and washing tank is recovered by the specially-developed belt. The oil skimmer contributes to machining accuracy improvement, machining fluid corruption and deterioration prevention, and washing accuracy improvement.

Model TB-75 (for washers) has a special belt suitable for quick and efficient recovery of dirty washing fluid and floated oil.

This option is to separate recovered floated oil from recovered washing fluid (or coolant), and recovery them using difference in specific gravity.

Fill the tank half-full with the washing fluid (or coolant) before use.

  • Recovered oil and fluid came out from the recovery slot of the oil skimmer go into the tank .
  • At this time, oil is separated from fluid by difference in specific gravity and, is ejected from the elbow for oil recovery.
  • Separated fluid passes under the partition plate, and goes into the tank.
  • Fluid is returned to the tank in the oil skimmer through the socket and pipe section on the tank.

Features

  •  Space Csaving and easy-installation with two bolts
  • Simple mechanism for easy maintenance
  • Highly-efficient floated oil recovery is achieved by the oleophilic and water-shedding special flat belt.
  • The recovery amount is constant as long as the belt touches the liquid level, i.e., the specially designed for liquid level change.

Applications

  • High use effect in the washer is achieved by the chemical-resistant and thermally-resistant special flat belt.

Specifications

Motor capacity 3-phase, 200 V, 15 W
Motor rotation speed 27/31r.p.m
Belt width 75mm
Recovery capability Approx. 45 l/h (For mineral oil)
Installation depth (L) 300 to 1,000 mm (100 mm pitch)

 *Contact us about different voltage, CCC and CE certificates. Belt types other than listed above are available.