Kofloc Model 6610 Pressure Regulator Valve

This valve has been developed for better repeatability and quick, reliable pressure regulation by increasing the accuracy of the low-pressure side compared with the Model 6600.

Description

This valve has been developed for better repeatability and quick, reliable pressure regulation by increasing the accuracy of the low-pressure side compared with the Model 6600. It is ideal for high-sensitivity analyzers and semiconductor manufacturing equipment, as well as for research and development

Brand

Kofloc

Kofloc

The natural environment is preserved through the balance of solids, liquids and gases that exist on the earth. However, human civilization has caused pollution that has greatly damaged our environment. The task of the present generation is to restore our environment to its natural healthy state. And this is also the greatest challenge for 21st century science and technology.

KOFLOC’s corporate motto is “A Scientific Approach for Fluids.” In other words, we create products that scientifically measure and control the balance of liquids and gases. We trust that through our work we are making a contribution to the regeneration of the environment and to the establishment of a prosperous society.

Features

  • High-precision regulation on the low-pressure side
    High regulation performance with repeatability of ±1% or less when the pressure on the primary side and load resistance on the secondary side change under the set pressure condition of 0.01–0.15 MPa.
  • Non-grease specification
    The sections in contact with gas are made of stainless steel, Viton, and Teflon without using grease. This valve is ideal for the semiconductor industry which requires ultra-clean conditions.
  • Lock nut
    The regulating position, once it has been set, can be fixed by a lock nut to prevent the setting from changing.
  • Non-bleed type
    This non-bleed type valve prevents gas from leaking to the outside.

Applications

  • Gas chromatography
  • High-purity gas control
  • Low-pressure controllers
  • Semiconductor industry

Specification

Fluids Various gases
Maximum primary pressure 0.4MPa
Secondary control pressure 0.01-0.15MPa
Maximum flow 5L/MIN
Minimum operating differential pressure 0.1 MPa or more
Materials of parts in contact with gases SUS316, FKM, fluorocarbon resin, SUS304,
SUS303
Proof pressure 0.8MPa
Repeatability Within ±1% of the pressure rating
Heat resistance 5℃-60℃
Connection end Rc1/8
Materials of parts in contact with fluids SUS316, FKM, fluorocarbon resin, SUS304,
SUS303