Kofloc Model 2450 Bellows Needle Valve

This bellows seal type needle valve has been specifically developed so that it can satisfy the requirements for such areas in which leak is a concern of vital importance.

Description

This bellows seal type needle valve has been specifically developed so that it can satisfy the requirements for such areas in which leak is a concern of vital importance.
Model 2450 Bellows Needle Valve has a construction to drastically prevent fluid leaks. In addition, it is outstanding in heat resistance and corrosion resistance, so the customer can use it with peace of mind not only in such adverse conditions where high vacuum, high pressure, high temperature or extremely low temperature is present but also for corrosive, toxic or costly fluids.

Brand

Kofloc

Kofloc

The natural environment is preserved through the balance of solids, liquids and gases that exist on the earth. However, human civilization has caused pollution that has greatly damaged our environment. The task of the present generation is to restore our environment to its natural healthy state. And this is also the greatest challenge for 21st century science and technology.

KOFLOC’s corporate motto is “A Scientific Approach for Fluids.” In other words, we create products that scientifically measure and control the balance of liquids and gases. We trust that through our work we are making a contribution to the regeneration of the environment and to the establishment of a prosperous society.

Features

  • Stringent leak test (2 x 10-8 Pam3/sec)
    100% leak test is conducted before shipping, using a helium leak detector.
  • Use of a precision needle
    The incorporated non-rotary type needle provides precise, smooth control of minute flows.
  • Compatible with both gases and liquids
    Superior temperature characteristic
    Flows are scarcely affected by ambient temperature fluctuations, remaining within an insignificant range of flow variations.
    This superior temperature characteristic is applicable to gases only, and not to liquids, because the viscosity of a liquid may greatly vary depending upon the temperature conditions.

Applications

  • For vacuum systems
  • For semiconductor manufacturing lines
  • For production lines where toxic or corrosive gases are present

Specification

Rated flow ranges See the table below
Number of turns of regulating screw Approx. 13–16 turns (Effective number of turns: 5–16)
Maximum operating pressure 1 MPa
Maximum operating temperature 120℃
Fluids Gas and liquid
Materials of parts in contact with fluids SUS316, fluorocarbon resin, FKM
Connection end 1/4 swagelok (for joint) * Optional: 1/8SW