Omron 3 Wire Proximity Sensor menggunakan osilasi frekuensi tinggi. Mereka menahan panas, bahan kimia, dan air lebih baik daripada Sensor Persegi Panjang. Mereka tersedia dalam model berpelindung dan tidak berpelindung.
Sensor Kedekatan tersedia dalam model yang menggunakan osilasi frekuensi tinggi untuk mendeteksi objek logam besi dan non-besi dan dalam model kapasitif untuk mendeteksi objek non-logam. Model tersedia dengan ketahanan lingkungan, tahan panas, tahan terhadap bahan kimia, dan tahan terhadap air.
Informasi Omron 3 Wire Proximity Sensor
Fitur dan Keunggulan
- Sensor Standar untuk mendeteksi besi.
- Beragam variasi. Ideal untuk berbagai model.
- Ketahanan lingkungan yang unggul dengan kabel standar yang terbuat dari PVC tahan minyak dan permukaan penginderaan yang terbuat dari bahan yang tahan pemotongan.
- Berguna untuk membantu mencegah.
- Pelindung kabel disediakan sebagai fitur standar.
Peringkat dan Spesifikasi
| Size Shielded | M8 | M12 | M18 | M30 | |||||
| Shielded | Unshielded | Shielded | Unshielded | Shielded | Unshielded | Shielded | Unshielded | ||
| Item Model | E2E | E2E | E2E | E2E | E2E | E2E | E2E-X10E@/ | E2E | |
| -X1R5E@/F@ | -X2ME@/F@ | -X2E@/F@ | -X5ME@/F@ | -X5E@/F@ | -X10ME@/F@ | F@ | -X18ME@/F@ | ||
| Sensing distance | 1.5 mm ±10% | 2 mm ±10% | 5 mm ±10% | 10 mm ±10% | 18 mm ±10% | ||||
| Set distance | 0 to 1.2 mm | 0 to 1.6 mm | 0 to 4 mm | 0 to 8 mm | 0 to 14 mm | ||||
| Differential travel | 10% max. of sensing distance | ||||||||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 18.) | ||||||||
| Standard sensing object | Iron, | Iron, 12 ´ 12 ´ 1 mm | Iron, | Iron, | Iron, 30 ´ 30 ´ 1 mm | Iron, | |||
| 8 ´ 8 ´ 1 mm | 15 ´15 ´ 1 mm | 18 ´ 18 ´ 1 mm | 54 ´ 54 ´ 1 mm | ||||||
| Response frequency | 2 kHz | 0.8 kHz | 1.5 kHz | 0.4 kHz | 0.6 kHz | 0.2 kHz | 0.4 kHz | 0.1 kHz | |
| Power supply voltage (operating voltage range) *2 | 12 to 24 VDC, ripple(p-p): 10% max. (10 to 30 VDC) | ||||||||
| Connector Models Used as UL-certified Models: 12 to 24 VDC, ripple (p-p): 10% max. (The operating voltage range is also the same.) *3 | |||||||||
| Current consumption | 13 mA max. | ||||||||
| 200 mA max. | |||||||||
| Control output | 2 V max. (Load current: 200 mA, Cable length: 2 m) | ||||||||
| Indicators | Operation indicator (red) | ||||||||
| Operation mode (with sensing object approaching) | E1/F1 Models: NO E2/F2 Models: NC | ||||||||
| Refer to the timing charts under /O Circuit Diagrams on page 21 for details. | |||||||||
| Protection circuits | Load short-circuit protection, Surge suppressor, Reverse polarity protection | ||||||||
| Ambient temperature range *2 | Operating/Storage: -40 to 85°C (with no icing or condensation) | ||||||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||||||
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C | ||||||||
| ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | |||||||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||||||
| Insulation resistance | 50 MÙ min. (at 500 VDC) between current-carrying parts and case | ||||||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current carry parts and case | ||||||||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||||||
| Destruction: 500 m/s2 | |||||||||
| Shock resistance | 10 times each in X, Y, and Z directions | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | |||||||
| Degree of protection | Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant Connector Models: IEC 60529 IP67 | ||||||||
| Connection method | Pre-wired Models (Standard cable length: 2 m) and Connector Models | ||||||||
| Weight (packed state) | |||||||||
| Pre- wired Models | Approx. 65 g | Approx. 75 g | Approx. 150 g | Approx. 195 g | |||||
| Connec- tor Models | Approx. 15 g | Approx. 25 g | Approx. 40 g | Approx. 90 g | |||||
| Case | Stainless steel (SUS303) | Nickel-plated brass | |||||||
| Sensing surface | PBT | ||||||||
| Clamp- ing nuts | Nickel-plated brass | ||||||||
| Materials | Toothed washer | Zinc-plated iron | |||||||
| Accessories | Instruction manual | ||||||||
Omron E2EM-X@C@ DC Long distance Proximity Sensor
Fitur
- Deteksi jarak jauh hingga 30 mm memungkinkan pemasangan yang aman dengan pengurangan masalah karena benda kerja.
- Tidak ada polaritas untuk pemasangan kabel yang mudah dengan DC 2-kawat.
- Pelindung kabel disediakan sebagai standar.
Specifications
| Size Shielded | M8 | M12 | M18 | M30 | |
| Shielded | Shielded | Shielded | Shielded | ||
| Item Model | E2EM-X2C@(-M1) | E2EM-X4C@(-M1) | E2EM-X8C@(-M1) | E2EM-X15C@(-M1) | |
| Sensing distance | 2 mm ±10% | 4 mm ±10% | 8 mm ±10% | 15 mm ±10% | |
| Set distance | 0 to 1.6 mm | 0 to 3.2 mm | 0 to 6.4 mm | 0 to 12 mm | |
| Differential travel | 10% max. of sensing distance | ||||
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 4.) | ||||
| Standard sensing object | Iron, 8 ´ 8 ´ 1 mm | Iron, 12 ´ 12 ´ 1 mm | Iron, 18 ´ 18 ´ 1 mm | Iron, 30 ´ 30 ´ 1 mm | |
| Response frequency *1 | 1.5 kHz | 0.5 kHz | 0.3 kHz | 0.1 kHz | |
| Power supply voltage (operating voltage range) *2 | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||||
| Current consumption | 13 mA max. | ||||
| Control output | Load current *2 | 200 mA max. | |||
| Residual voltage | 2 V max. (Load current: 200 mA, Cable length: 2 m) | ||||
| Indicators | Operation indicator (yellow) | ||||
| Operation mode (with sensing object approaching) | C1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 5 for details. C2 Models: NC | ||||
| Protection circuits | Reverse polarity protection, Load short-circuit protection, Surge suppressor | ||||
| Ambient temperature range | Operating: -25 to 70°C Storage: -40 to 85°C (with no icing or condensation) | ||||
| *1 | Operating/Storage: -40 to 85°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C | ±15% max. of sensing dis- tance at 23°C in the temperature range of -25 to 70°C | |||
| ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C | |||||
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||
| Insulation resistance | 50 MÙ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance | Destruction: 500 m/s2 10 times each in X, Y, and Z directions | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | |||
| Degree of protection | Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant Connector Models: IEC 60529 IP67 | ||||
| Connection method | Pre-wired Models (Standard cable length: 2 m) Connector Models | ||||
| Weight (packed state) | Pre-wired Models | Approx. 65 g | Approx. 75 g | Approx. 150 g | Approx. 195 g |
| Connector Mod- els | Approx. 15 g | Approx. 25 g | Approx. 40 g | Approx. 90 g | |
| Case | Stainless steel (SUS303) | Nickel-plated brass | |||
| Sensing surface | PBT | ||||
| Clamping nuts | Nickel-plated brass | ||||
| Materials | Toothed washer | Zinc-plated iron | |||
| Accessories | Instruction manual | ||||
*1. Frekuensi respons adalah nilai rata-rata.
Kondisi pengukuran adalah sebagai berikut: objek penginderaan standar, jarak dua kali objek penginderaan standar, dan jarak yang ditetapkan setengah jarak penginderaan.
*2. Saat menggunakan Model M8 pada suhu sekitar antara 70 dan 85°C, suplai 10 hingga 30 VDC ke Sensor dan pastikan Sensor memiliki output kontrol maksimum 100 mA.
Sumber: Omron.co.id | Inaparts.com
Baca Juga:
