The EGE Elektronik Sensor for Explosive Productseries STS 104 S is the definitive choice for facilities requiring high-precision flow monitoring in restricted spaces where maintenance efficiency is a priority. The “S” designation indicates a plug-in connector interface.
The EGE Elektronik Sensor for Explosive Productseries STS 104 S is the definitive choice for facilities requiring high-precision flow monitoring in restricted spaces where maintenance efficiency is a priority. The “S” designation indicates a plug-in connector interface. This allows for rapid sensor replacement or calibration without the need to disconnect and re-route fixed wiring through the hazardous zone, significantly reducing operational downtime.
EGE-Elektronik Spezial-Sensoren GmbH has been developing and manufacturing special purpose sensors for automation applications since 1976. The company serves leading international producers from a wide range of industries. Its product portfolio includes flow controllers, infrared, opto and ultrasonic sensors, capacitive proximity switches, light barriers and inductive proximity switches. EGE also provides sensors for highly sensitive applications, e. g. hazardous areas. The development department`s highly qualified staff cooperates closely with all customers, ensuring continuous product updates and enhancement.
EGE has been a pioneer in the field of flow controller and an innovator and decisive participant in the development of today's globally utilized thermal flow controllers. The in-house EMC and test laboratories ensure that all inspections and tests required for permits and conformity certificates are carried out quickly and reliably. Product quality is guaranteed with a continuously monitored quality management system in accordance with EN ISO 9001:2000.
| TYPE | STS 104 S |
|---|---|
| Product ID | P11167 |
| Medium | water, oil |
| Detection range water | 1 … 100 cm/s |
| Detection range Oil | 3 … 200 cm/s |
| Process connection | NPT1/2 |
| Sensor length L | 40 mm |
| Output | output with separate amplifier |
| Ex area uf use | installation in partition wall Zone 0/1, Zone 0, Zone 20 |
| ATEX Certificate | TÜV 98 ATEX 1298 X |
| Marking gas Ex for partition wall mounting | Ex II 1/2 G Ex ia IIC T6…T3 Ga/Gb |
| ATEX marking gas | Ex II 1 G Ex ia IIC T6…T3 Ga |
| ATEX Marking dust | Ex II 1 D Ex ia IIIC T125°C Da |
| Temperature range in T6 | -20 … 40 °C |
| Temperature range in T5 | -20 … 55 °C |
| Temperature range in T4 | -20 … 85 °C |
| Temperature range in T3 | -20 … 85 °C |
| Temperature range dust-Ex | -20 … 85 °C |
| Maximum values | Ui = 13.65 V / li = 200 mA / Pi = 0.69 W / Ci = 0.45 nF / Li = 1.80 µH |
| Start-up time typ. | 8 s (2 … 18 s) |
| Reaction time typ. | 2 s (1 … 13 s) |
| Compressive strength | 60 bar |
| Material sensor touched by medium | stainless steel AISI 316 Ti |
| Material housing | stainless steel AISI 316 Ti, brass, PA |
| Protection [EN 60529] | IP 67 |
| Electrical connection | M12 connector |
| Associated amplifiers | SZAb 400 EX-GR, SZAb 400 EX-WR115, SZAb 400 EX-WR230, SZAb 400 EX-GA |
Thermodynamic Reliability: Solid-state design with zero mechanical wear or friction-induced ignition risks.
Premium V4A Stainless Steel: 1.4571 construction for maximum chemical and pressure resistance.
High Pressure Durability: Rugged probe design safely operates in systems pressurized up to 100 bar.
Modular Dosing Skids: Rapid-swap sensors for volatile reagent monitoring in compact systems.
Pharmaceutical Manifolds: Precision flow detection in small-bore solvent lines within Ex-rated cleanrooms.
Laboratory Pilot Plants: Reliable monitoring in restricted spaces with explosive gas risks.
Hydraulic Systems: Safe monitoring of oil flow in hazardous machinery with compact ports.
