The EGE Elektronik Sensor for Explosive Productseries STS 110 KH-L110 is the definitive solution for monitoring flow in large-scale industrial infrastructure where explosive risks and extreme heat coincide.
The EGE Elektronik Sensor for Explosive Productseries STS 110 KH-L110 is the definitive solution for monitoring flow in large-scale industrial infrastructure where explosive risks and extreme heat coincide. The “L110” designation indicates a 110mm probe length, allowing the sensor to penetrate through thick pipe walls, mounting nozzles, or mineral wool insulation to reach the center of the flow stream for maximum accuracy.
EGE-Elektronik Spezial-Sensoren GmbH has been developing and manufacturing special purpose sensors for automation applications since 1976. The company serves leading international producers from a wide range of industries. Its product portfolio includes flow controllers, infrared, opto and ultrasonic sensors, capacitive proximity switches, light barriers and inductive proximity switches. EGE also provides sensors for highly sensitive applications, e. g. hazardous areas. The development department`s highly qualified staff cooperates closely with all customers, ensuring continuous product updates and enhancement.
EGE has been a pioneer in the field of flow controller and an innovator and decisive participant in the development of today's globally utilized thermal flow controllers. The in-house EMC and test laboratories ensure that all inspections and tests required for permits and conformity certificates are carried out quickly and reliably. Product quality is guaranteed with a continuously monitored quality management system in accordance with EN ISO 9001:2000.
| TYPE | STS 110 KH-L110 |
|---|---|
| Product ID | P11416 |
| Medium | water, oil |
| Detection range water | 1 … 100 cm/s |
| Detection range Oil | 3 … 200 cm/s |
| Process connection | G1/2 |
| Sensor length L | 110 mm |
| Output | output with separate amplifier |
| Ex area uf use | installation in partition wall Zone 0/1, Zone 0, Zone 20 |
| ATEX Certificate | TÜV 98 ATEX 1298 X |
| Marking gas Ex for partition wall mounting | Ex II 1/2 G Ex ia IIC T6…T3 Ga/Gb |
| ATEX marking gas | Ex II 1 G Ex ia IIC T6…T3 Ga |
| ATEX Marking dust | Ex II 1 D Ex ia IIIC T125°C Da |
| Temperature range in T6 | -20 … 40 °C |
| Temperature range in T5 | -20 … 55 °C |
| Temperature range in T4 | -20 … 90 °C |
| Temperature range in T3 | -20 … 120 °C |
| Temperature range dust-Ex | -20 … 85 °C |
| Maximum values | Ui = 13.65 V / li = 200 mA / Pi = 0.69 W / Ci = 0.45 nF / Li = 1.80 µH |
| Start-up time typ. | 8 s (2 … 18 s) |
| Reaction time typ. | 2 s (1 … 13 s) |
| Compressive strength | 60 bar |
| Material sensor touched by medium | stainless steel AISI 316 Ti |
| Material housing | stainless steel AISI 316 Ti |
| Protection [EN 60529] | IP 67 |
| Electrical connection | 2 m FEP-cable 4×0.25 mm² |
| Accessories (in scope of delivery) | 2 x gasket G1/2 AFM 34 |
| Associated amplifiers | SZAb 400 EX-GR, SZAb 400 EX-WR115, SZAb 400 EX-WR230, SZAb 400 EX-GA |
Extended 110mm Probe (L110): Engineered for large pipe diameters, deep mounting nozzles, or heavily insulated systems.
High-Temperature Resistance (KH): Thermal decoupling neck supports continuous monitoring of media up to 120°C.
Ultimate Ex-Protection (Zone 0/20): ATEX/IECEx certified for areas where explosive media is present continuously.
Large-Scale Chemical Reactors: Reaching deep into reactor vessels to monitor hot, volatile reagents.
Refinery Main Lines: Flow monitoring in large-diameter pipes carrying pre-heated hydrocarbons.
Heavily Insulated Piping: Reaching through thick thermal cladding in high-temperature hazardous loops.
Thermal Oil Systems: Safe flow verification in high-heat circuits within industrial refineries.
