CS Instruments CS 10 And CS 16 Standard Pressure Sensor

Description

The CS Instruments CS 10 And CS 16 Standard Pressure Sensor series provides dependable measurement data for standard industrial ranges. The CS 10 is designed for a pressure ratio of 0…10 bar, while the CS 16 accommodates slightly higher pressures with a ratio of 0…16 bar. This variety allows engineers to select the exact sensor range that matches their system’s operating pressure, ensuring optimal resolution.

For general process monitoring, the sensors deliver a standard accuracy of full scale 1%. However, for applications requiring more exact measurement within the same pressure ratios, the CS 10 and CS 16 sensors are available with an enhanced accuracy of full scale 0.5%.

To facilitate easy installation and communication with PLCs or SCADA systems, these devices utilize a standard output signal of 4…20 mA via a 2-Wire connection. They are built to operate efficiently on a power supply ranging from 8…30 VDC.

Brand

CS Instruments

CS Instruments GmbH & Co. KG with locations in 24955 Harrislee and 78052 Villingen-Schwenningen/ Tannheim, is managed by Dipl. Eng. (FH) Wolfgang Blessing as sole Managing Director.

CS Instruments GmbH was established in the year 2002 by Christian Schuldt and Wolfgang Blessing as equal shareholders/Managing Directors.

Wolfgang Blessing already was sound a specialist on the sector of compressed air technology resp. industrial measurement technology long before the establishment of CS Instruments GmbH in the year 2002. Prior to the foundation of CS Instruments GmbH Dipl. Ing. (FH) Wolfgang Blessing acted for more than 10 years as primarily responsible product manager for industrial measurement technology at a worldwide known manufacturer of measuring instruments for compressed air and gases in the Black Forest. The technical knowledge and experience matched with the long-term practical knowledge was the corner stone for the success of CS Instruments.

Specifications

Wetted parts: 316L
Housing: 316L
Non-linearity: 0,5 BFSL
Parameter: bar
Type of pressure:: relative, absolute, vacuum
Measuring range: 0…16 bar, 32 bar overpressure limit
Process connections: G 1/4A according to DIN 3852-E
Sealing: NBR
Permissible temperature: 0…+80 °C
Output signal: 4…20 mA, 2-Leiter
Power supply: 8…30 VDC
Accuracy at room temperature: < ±1 % of span (optionally < ±0,5 % of span)
Electrical connection: Angular connector DIN EN 175301-803 A, ingress protection IP 65,
wire cross-section up to max. 1.5 mm², cable diameter: 6…8 mm