PRODUCT

BRAND

LATEST ARTICLES

Air Motor dan air gearmotor

Air Motor dan Air Gearmotor

Pengenalan Air Motor Pneumatic Air motor adalah penggerak yang digunakan untuk memutar suatu benda baik itu conveyor, pompa, dan mixer. Yang sering dan banyak digunakan

Read More »

TSV Takuwa Vibration Sensor for Debris Flow Detection

Takuwa Vibration Sensor for Debris Flow Detection TSV Type

Table of Contents

TSV Takuwa Vibration Sensor with acceleration sensor is to detect the vibration caused by debris flow and volcanic mud flow. It is designed to provide the alert when the vibration detected by acceleration sensor is greater than a certain definite value (arbitrarily-settable alert level) and continued during a certain definite time (arbitrarily-settable continuous detection time)

In addition, alarm output can be set up in 5 (five) steps and it allows an estimate of scale of debris flow in real-time at great distances by transmitting individual alarm output.

Vibration sensor is for detecting a debris flow indirectly and repeatedly by measuring a ground vibration. Usually sensor is buried in ground near the torrent.

Detected signal can be output to the warning siren device for evacuation information. In addition, it is possible to estimate discharge of debris flow by amplitude of vibration.

Specification:

  1. Vibration Sensor

– Model: TSV-04H

– Function:

  • Acceleration sensor (Sensor type: Capacitance type Detection method: Horizontal uniaxial)
  • Measuring range: 0.05~2m/s² (5~200gal)
  • Frequency band 0~100Hz

– Power supply: DC12V (supply from converter)

– Enviromental condition: -20ºC-+50ºC (non-freezing)

– Structure: Waterproof • Edust-proof construction (IP65)

– Dimension: 149W X 85H X 106Dmm (not including projection)

– Weight: 2.0kg or less

     2. Converter

– Model: TSV-01C

– Function:

  • Frequency characteristic: Low-pass fiber (Choose from 10 or 50 or 100Hz) DC component cut fiber (1Hz)
  • Measuring range: 0.05-2m/s² (5-200gal)
  • Alarm setting (Level): Acceleration level (5 steps)
  • Alarim setting (Duration time): 1-10 sec
  • Condition of alarm output: Alarm setting (Level) and Alarm setting (Duration time)
  • Contact output: Alam contact: 5 points X 2CH
  • Parity of alarm contact (OR): 1 points X 2CH
  • Abnormal voltage: 1 point X 2CH
  • Start pulse: 1 point X 2ch
  • Contact  output form: Non-voltage A contact (Photo MOS relay output): Max. 200V (AC/DC) 200mA
  • Analog output: ±5V   1CH
  • Event log recording: Max 500 recording (LCD)

– Power supply: DC12V (10.5-16.5V)

– Enviromental condition:

  • Ambient temperature: -10ºC -+50ºC (not including LCD)
  • Ambient humidity: 30%-90% (non condensing)

– Structure: Outdoor, wall-mounted type (Protection code IP65)

– Dimension:

  • 200W X 300H X165Dmm
  • not including projection portion as mounting bracket, etc.

– Weight: 3.0kg or less

Share on facebook
Facebook
Share on google
Google+
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

Leave a Reply

Your email address will not be published. Required fields are marked *