PRODUCT

BRAND

LATEST ARTICLES

Burkert Type 5282 Servo-assisted 2/2-way Diaphragm Valve

Burkert Type 5282 Servo-assisted 2/2-way Diaphragm Valve

Table of Contents

The Burkert 5282 valve is a servo-assisted diaphragm valve. A minimum differential pressure is required for the valve to function. Various diaphragm material combinations and circuit functions are available depending on the application. The standard brass body satisfies all European drinking water requirements. The body offering is completed with stainless steel versions.

The 3/2-way pilot valve can be easily converted from NC to NO circuit function by rotating it on the armature. The solenoid coils are moulded with a chemically resistant epoxy. The 5282 is equipped with manual override for start-up and testing. In combination with a plug acc. to DIN EN 175301-803 Form A and stainless steel body, the valves satisfy the requirements of NEMA 4X. This product can be combined with Cable Plug type 2518 and Timer type 1087.

Features

  • Servo-assisted diaphragm valve up to DN65 orifice
  • Separating diaphragm for aggressive and contaminated media
  • Closing and opening times can be adjusted individually
  • Explosion-proof versions (Cat.2)
  • Service-friendly manual override

Specifications

Technical Data

Product characteristics

Dimensions Detailed information can be found in chapter “5. Dimensions” on page 5 of datasheet.
Materials

Threaded body

 

 

Flange body

Internal valve parts

Coil

seal

 

Brass according to DIN EN 50930−6

DN13 stainless steel CF3M

DN 20…DN 50 stainless steel 1.4581

Stainless steel 1.4581

Stainless steel, brass

Epoxide

NBR, EPDM, FKM

Nominal diameter DN13…DN65
Thermal insulation class of solenoid H

Performance data

Switching times Opening: 0.1…0.8 sec.

Closing: 1.0…4.0 sec.

Electrical data

Operating voltage 024/DC, 024/56, 230/56, 024/UC, 230/UC
Voltage tolerance ±10%
Electrical connection
StandardEx
 

Plug tabs according to DIN EN 175301-803 Form A for cable plug Type 2518

With moulded cable 3 m long, 3×0.5 mm2

With terminal box

Nominal operating mode Continuous operation 100% duty cycle
Electrical power consumption

Standard

 

 

Ex

 

Inrush AC 24 VA

Operation AC 14/8 VA W

DC cold/hot 11/8 W

Inrush AC 40 VA

Operation AC 3 VA W

DC cold/hot 40 W inrush / 3 W operation

Medium data

Medium temperature

With NBR

With EPDM

With FKM

 

0 °C…+80 °C

-25 °C…+90 °C

0 °C…+90 °C

Operating medium

With NBR

 

With EPDM

With FKM

 

Neutral media, e.g. compressed air, water, hydraulic oil

Oil and grease-free media, alkalis, hot water

Hot air, per solutions, hot oils

Approvals and certificates

Guidelines CE, EAC

Environment and installation

Ambient temperature Max. +55 °C
Degree of protection IP65 with cable plug according to DIN EN 175301-803 Form A

IP65 with cable connection or terminal box

Installation position Any, preferably actuator face up

Approvals
Explosion-proof approvals
Type of protection (ATEX and IECEx)

Share on facebook
Facebook
Share on google
Google+
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

Leave a Reply

Your email address will not be published. Required fields are marked *