Wenglor OCP662X0080 Laser Distance Sensor High Precision

These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness. Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments. Sensor functions can be activated and values can be output via the RS-232 interface.

Description

These sensors work with a high resolution CMOS line and DSP technology and calculate the distance via an angle measurement. This virtually eliminates switching point differences caused by material, color and brightness. Two independent switching outputs are available, at which two switching thresholds and one on-delay or off-delay time can be set in 10 ms increments. Sensor functions can be activated and values can be output via the RS-232 interface.

Brand

Wenglor

Wenglor

Technology that moves in over three decades of wenglor sensoric. On this interactive journey through time, we researched deep into wenglor’s archives and have tracked the history of the company since the eighties – starting in an attic and growing into a global corporation.

The innovative company for smart sensor and image processing technologies. Many patented product and system solutions are used in countless automated industries worldwide. Constant growth, outstanding products and excellent corporate governance qualify wenglor as a top employer in the SME sector.

Features

  • CMOS line array
  • Highly accurate switching distance
  • Minimal switching hysteresis
  • Special coated optics

Applications

B_BED_P_08.eps
07 = Selector Switch
24 = Plus Button
25 = Minus Button
03 = Error Indicator
01 = Switching Status Indicator

Specification

Optical Data

Range 660 mm
Setting Range 60 … 660 mm
Switching Hysteresis  < 1 %
Light Source Laser (red)
Wavelength 655 nm
Service Life (T = +25 °C) 100,000 h
Laser Class (EN 60825-1) 1
Max. Ambient Light 10,000 Lux
Light Spot Diameter see Table 1

Electrical Data

Supply Voltage 10 … 30 V DC
Current Consumption (Ub = 24 V) < 50 mA
Switching Frequency 100 Hz
Response Time  < 5 ms
On-/Off-Delay (RS-232) 0 … 1 s
Temperature Drift < 50 µm/K
Temperature Range -25 … 60 °C
Number of Switching Outputs 2
Switching Output Voltage Drop < 1.5 V
Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Teach Mode HT, VT, TP
Baud Rate 38,400 Bd
Protection Class III
FDA Accession Number 1120728-000

Mechanical Data

Setting Method Teach-In
Housing Material Plastic
Coated Optics yes
Degree of Protection IP67
Connection M12 × 1; 8-pin

Output

Error Output yes
PNP NO yes
RS-232 Interface yes

Adjustable parameters

Output Error Output
Push-pull
NPN
PNP
Circuit NC
NC/NO
NO
Other parameters Off-delay
On-delay
Exposure time
Switching hysteresis
Emitted light
Teach-in mode

Table 1

Detection Range 60 mm 660 mm
Spot Size 0,5 × 1,2 mm 2 × 5,5 mm