CS Instruments VA 500 - Flow Meter For Compressed Air And Gase

Thermal mass flow sensor for compressed air and gases. Recording and reducing energy costs and CO2 emissions while increasing the sustainability of any compressed air system.

Description

Thermal mass flow sensor for compressed air and gases. Recording and reducing energy costs and CO2 emissions while increasing the sustainability of any compressed air system. With our VA500 it is possible to monitor your consumption and analyze your leakage flows with just one measuring device. Due to its design, it is also ideal for mobile measurements.

Brand

CS Instruments

CS Instruments

CS Instruments GmbH & Co. KG with locations in 24955 Harrislee and 78052 Villingen-Schwenningen/ Tannheim, is managed by Dipl. Eng. (FH) Wolfgang Blessing as sole Managing Director.

CS Instruments GmbH was established in the year 2002 by Christian Schuldt and Wolfgang Blessing as equal shareholders/Managing Directors.

Wolfgang Blessing already was sound a specialist on the sector of compressed air technology resp. industrial measurement technology long before the establishment of CS Instruments GmbH in the year 2002. Prior to the foundation of CS Instruments GmbH Dipl. Ing. (FH) Wolfgang Blessing acted for more than 10 years as primarily responsible product manager for industrial measurement technology at a worldwide known manufacturer of measuring instruments for compressed air and gases in the Black Forest. The technical knowledge and experience matched with the long-term practical knowledge was the corner stone for the success of CS Instruments.

Features

  • Measurement of mass flow direct output of standard volume flow
  • Highly accurate at small as well as higher flow rates
  • Pressure and temperature compensated by the thermal mass flow principle
  • Quick and easy installation via a ½” ball valve
  • No moving parts, thus low maintenance
  • Vanishingly low pressure drop due to vanishingly low blockage of the diameter
  • Can be used for compressed air and non-corrosive gases such as nitrogen, oxygen, argon, helium, etc.

Applications

  • Application report underwater noise protection
  • special cleaning (free from oil and grease) for oxidizing gases
  • for nitrogen in tire vulcanization
  • Measurement and control of the flow rate in a production of compressed air in the cosmetics sector

 

 

Specifications

  • 04…20 mA, pulse and a Modbus RTU (RS 485) interface as standard.                                     Optional: Interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
  • Optional: Interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
  • Optional: Bi-directional measurement
  • Pressure tight up to 50 bar
  • Temperature range up to 110°C
  • Protection class IP65
  • Integrated display for showing the measured values
  • Can be used from 1/2″ up to 40″, larger diameters on request
  • Easy installation under pressure
  • Settings can be changed via the display
  • Main counter reading can be reset via the display
  • Suitable for gas velocities up to 224 Nm/s
  • Highly precise with an accuracy of ± 1.5% or ± 1% of the measured value ± 0.3% of the final value

Couldn’t find what you were looking for?

Contact us with your specification for assessment and availability of other products configurations.

Click Here