CS Instruments DS 400 Set - Stationary Dew Point Measurement In Compressed Air Systems

For stationary dew point monitoring of refrigeration or adsorption dryers. The touch screen graphic display enables an intuitive operation and shows the progress of the measured values.

Description

For stationary dew point monitoring of refrigeration or adsorption dryers. The touch screen graphic display enables an intuitive operation and shows the progress of the measured values. 2 alarm relays are available for monitoring of threshold values. Available either with a classic analogue output 4…20 mA or optionally with digital interfaces like Ethernet and RS 485 (Modbus protocol). As a stand-alone solution the measured data stored in the optional data logger can be read-out via USB stick and evaluated by means of the software CS Soft Basic.

Brand

CS Instruments

CS Instruments

CS Instruments GmbH & Co. KG with locations in 24955 Harrislee and 78052 Villingen-Schwenningen/ Tannheim, is managed by Dipl. Eng. (FH) Wolfgang Blessing as sole Managing Director.

CS Instruments GmbH was established in the year 2002 by Christian Schuldt and Wolfgang Blessing as equal shareholders/Managing Directors.

Wolfgang Blessing already was sound a specialist on the sector of compressed air technology resp. industrial measurement technology long before the establishment of CS Instruments GmbH in the year 2002. Prior to the foundation of CS Instruments GmbH Dipl. Ing. (FH) Wolfgang Blessing acted for more than 10 years as primarily responsible product manager for industrial measurement technology at a worldwide known manufacturer of measuring instruments for compressed air and gases in the Black Forest. The technical knowledge and experience matched with the long-term practical knowledge was the corner stone for the success of CS Instruments.

Features

  • 3.5″ graphic display – easy operation with touch screen
  • System ready for plug-in: Everything completely wired
  • 2 alarm contacts (230 VAC, 3 A) pre- and main alarm freely adjustable
  • An alarm delay can be set for each alarm relay
  • 4…20 mA analogue output
  • Option: Ethernet and RS 485 interface (Modbus protocol)
  • Option: Webserver

Applications

  • refrigeration or adsorption dryers

Specifications

  • Dimensions: 118 x 115 x 98 mm
    IP 54 (wall housing)
    92 x 92 x 75 mm
    (panel mounting)
  • Inputs: 2 digital inputs for FA 510 or VA
    500/520
  • Interface: USB interface
  • Power supply: 100…240 VAC, 50-60 Hz
  • Accuracy: See FA 510
  • Alarm outputs: 2 relays, (pot.-free)
  • Options:
  • Data logger: 100 million measured values
    start/stop time, measuring rate
    freely adjustable
  • 2 additional
    sensor inputs:
    For connection of pressure
    sensors, temperature sensors,
    clamp-on ammeters, third-party
    sensors with 4…20 mA, 0 to
    10 V, Pt 100, Pt 1000

Additional Informations

  • Standard measuring chamber : for compressed air up to 16 bar
  • High-pressure measuring chamber : for compressed air up to 350 bar
  • Control and calibration set for dew point sensors : is screwed onto the dew point sensor and therefore enables an easy and low-priced possibility for on-site control and calibration down to -20°Ctd.
  • Measuring chamber stainless steel 1.4305, for dew point measurement : in gases / air up to 350 bar

Couldn’t find what you were looking for?

Contact us with your specification for assessment and availability of other products configurations.

Click Here