CS Instruments Dew Point Transmitter FA 415 For The Monitoring of Refrigeration Dryers

Dew point transmitter FA 415 for the monitoring of refrigeration dryers. The ideal dew point transmitter for the monitoring of refrigeration dryers with analogue output 4…20 mA.

Description

Dew point transmitter FA 415 for the monitoring of refrigeration dryers. The ideal dew point transmitter for the monitoring of refrigeration dryers with analogue output 4…20 mA.

Brand

CS Instruments

CS Instruments

CS Instruments GmbH & Co. KG with locations in 24955 Harrislee and 78052 Villingen-Schwenningen/ Tannheim, is managed by Dipl. Eng. (FH) Wolfgang Blessing as sole Managing Director.

CS Instruments GmbH was established in the year 2002 by Christian Schuldt and Wolfgang Blessing as equal shareholders/Managing Directors.

Wolfgang Blessing already was sound a specialist on the sector of compressed air technology resp. industrial measurement technology long before the establishment of CS Instruments GmbH in the year 2002. Prior to the foundation of CS Instruments GmbH Dipl. Ing. (FH) Wolfgang Blessing acted for more than 10 years as primarily responsible product manager for industrial measurement technology at a worldwide known manufacturer of measuring instruments for compressed air and gases in the Black Forest. The technical knowledge and experience matched with the long-term practical knowledge was the corner stone for the success of CS Instruments.

Features

  • Analogue output 4…20 mA
  • Precise, long-term stability
  • Quick response time
  • Measuring range -20…50°Ctd

Applications

  • Mounting with standard measuring chamber for compressed air up to 16 bar
  • Easy installation via quick coupling

Specifications

  • Measuring
    range:
    -20…50°Ctd
    resp. 0…100% RH
  • Accuracy: ± 1°C at 0…20°Ctd
    ± 2°C remaining
    range
  • Pressure range: -1…16 bar
  • Power supply: 24 VDC (10…30
    VDC)
  • Protection
    class: IP 65
  • EMV: according to DIN EN
    61326
  • Operating temp: -20…70 °C
  • Connection: M12, 5-pole
  • PC connection: SDI interface
  • Screw-in thread: G 1/2“
    Dimensions: Ø 30 mm, length
    approx. 130 mm
  • Output FA 415: 4…20 mA =
    -20…50°Ctd
    Burden for analogue output:
    ȍ

Additional Informations

  • Standard measuring chamber : for compressed air up to 16 bar
  • Control and calibration set for dew point sensors : is screwed onto the dew point sensor and therefore enables an easy and low-priced possibility for on-site control and calibration down to -20°Ctd.