CS Instruments FA 515 Ex - Dew Point Sensor

Our new tool for dew point measurement resp. pressure dew point measurement in potentially explosive atmospheres.

Description

Our new tool for dew point measurement resp. pressure dew point measurement in potentially explosive atmospheres. The FA 515 Ex can be used in many non-aggressive gases.

Brand

CS Instruments

CS Instruments

CS Instruments GmbH & Co. KG with locations in 24955 Harrislee and 78052 Villingen-Schwenningen/ Tannheim, is managed by Dipl. Eng. (FH) Wolfgang Blessing as sole Managing Director.

CS Instruments GmbH was established in the year 2002 by Christian Schuldt and Wolfgang Blessing as equal shareholders/Managing Directors.

Wolfgang Blessing already was sound a specialist on the sector of compressed air technology resp. industrial measurement technology long before the establishment of CS Instruments GmbH in the year 2002. Prior to the foundation of CS Instruments GmbH Dipl. Ing. (FH) Wolfgang Blessing acted for more than 10 years as primarily responsible product manager for industrial measurement technology at a worldwide known manufacturer of measuring instruments for compressed air and gases in the Black Forest. The technical knowledge and experience matched with the long-term practical knowledge was the corner stone for the success of CS Instruments.

Features

  • Robust design
  • Pressure resistant up to 500 bar
  • Long-term stable humidity sensor, approved for years
  • 4…20 mA analogue output in 2-wire system
  • Further parameters adjustable via software: % RH, g/m³, mg/m³, ppm, V/V, g/kg
  • NEW: Higher resolution of the sensor signal due to improved evaluation electronics

Applications

  • Air/Compressed air
  • Argon
  •  Nitrogen
  •  Biogas
  •  Natural gas
  •  Hydrogen
  •  etc…

Specifications

  • Measuring range: -80…20 °Ctd = 4…20 mA
  • Pressure range: -1…500 bar
  • Power supply: 24 VDC (18…28 VDC)
  • Accuracy: ± 1 °C at -20…+20 °Ctd
    ± 2 °C at -50…-20 °Ctd
    ± 3 °C at -80…-50 °Ctd
  • Output: 4…20 mA in 2-wire technology
  • Protection class: IP 65
  • EMC: In acc. with DIN EN 61326-1
  • Operating temperature:
    -20…+70 °C
  • Storage temperature:
    -40…+80 °C
  • Burden for analogue
    output:
    < 500 Ω at 24 V
  • Screw-in thread: G 1/2″ stainless steel
    optional 5/8″ UNF
  • Connection: M12, 4-pin
  • Sensor protection: Sinter fi lter 50 µm stainless
    stee